Unboxing the device
Device version: every
VIDEO TUTORIAL:
https://www.youtube.com/watch?v=7ex-TJtF1zs&ab_channel=WorldofBin-e
DESCRIPTION:
After receiving the device it is important to check if the device was handled properly during the transportation. First, please check the tilt sensor placed on the box. If the metal balls are indicating “start” position it means that the device was carried in the right position. However if the metal balls inside are placed in some other position, please take a picture of this and contact us. This is also very important documentation in case you would like to handle the official complaint to the delivery company.
Check if the box is not broken or destroyed. If you see any damages or anything that seems odd, contact us and we will help.
To open the box you will have to use a special tool, which is attached to the box. Start with the top cover because this part will be used as a ramp to safely take the device out of the pallet.
After the top cover, take off the narrow side and then the wider side of the box. Cut the straps which hold the device to the pallet, unlock the wheels by pushing the triggers up and carefully push the device out of the ramp. Disassemble the rest of the box.
Unwrap the device from the securing tape and check if the branding was not damaged during the transportation.
Open the front cover by pulling it and take the inner bins out of the casing just to make sure that they will be placed in the right position. In the first bin you will find a small box with the power cable, manuals and other objects according to your order. Put the bins inside the device and close the front cover.
Now open the top cover, in order to unlock it you have to twist the bolts which are placed inside on both sides of the device.
After you open the top cover check if the trolley with the recognition chamber is placed below the opening, above the second bin. If the trolley is in some other position, contact us and we will take additional steps to check if the device is ok. If everything is alright, you can close the top cover and lock it with the bolts.
Next step is the installation.