Replace motors mechanism

In this document you will find a description how to replace the throw flaps motors system in the Smartb

You will need:

Before replacing disconnect device from the power supply!

With practice, some points can be omitted, but the simplest path will be described here

this is just to have easier access to the motor plug and screw. Is not always necessary
Depending on the hardware version, may be blind rivet nuts or a separate nut

this is just to have easier access to the motor plug and screw. Is not always necessary Depending on the hardware version, the bolt may be from the front or rear

there is only one two-pin plug with a red and black cable
Never pull the cables, only the plastic connector!

there are two Allen screws holding the entire mechanism


when installing the new mechanism, make sure that the parts fit together as in the photo